XFEM4U Nodes: Difference between revisions

From Struct4u
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 1: Line 1:
[[Documentation XFEM4U | BACK]]
[[Documentation XFEM4U | BACK]]



Latest revision as of 12:31, 10 September 2022


BACK

Nodes can easily be added in the graphical screen. To do this, you have to choose Cur node.png in the menu bar. In these modus you can add multiple nodes by means of the left mouse button. By placing the node, you will see the coordinates in the right bottom. As is shown in this image below.

Shown in this image below. node2.png

Nodes can be added arbitrary in a fixed raster or at grid lines.

Supports are nodes which are restrained in a certain direction.

Changing a node

Changing a node is possible by clicking on the node by use of the left mouse button, and subsequently choose for properties by clicking on the right button. There is a more easy way, namely a double click on the node. Consequently the following dialog box will be opened.

Nodes 4.png

Coordinates

x

x-coordinate

y

y-coordinate

z

z-coordinate

Local x-axis

See XFEM4U Design Arrangements.

Supports

See XFEM4U Supports.

These are the supports that are the most common in practice, but you can also add an arbitrary (spring) support by making use of the 'A', 'P', 'N' or 'S'.

Wikipedia encyclopedia

Eccentricities

Only for supports ( nodes with restrictions / restraints in a certain direction) you can add a eccentricity by inserting 3 relative coordinates dx, dy and dz. An extra node and a 'stiff' beam are automatically generated. Hereby you can, for example, in the calculation of a concrete beam grid, take the misplacement of a pile into account. The foundation beams can subsequently be tested for torsion and extra bending.

Mesh

For more information check this page.

Table nodes

Nodes can also be added / changed in the bottom left table Nodes. It does not matter. It is also possible to change in between graphical input and numerical input via tables.

Wikipedia encyclopedia

Local coordinate system

In every node a local node-coordinate system can be added.

Local coordinate system.png

Example of a roller support among an angle.

Local X-axis

The origin lies in the relevant node. The direction of the x-axis is determined by 3 relative coordinates (see the figure above). Local coordinate systems can also be used to insert node limitations (supports or restraints), but also node loads and/or node displacements in an arbitrary direction.