XFEM4U Eurocode RC

From Struct4u
Revision as of 06:22, 22 August 2022 by Struct4U (talk | contribs) (Created page with " BACK ====Beam grid concrete==== With '''XFEM4U''' you can easily design a beam grid or a piled concrete foundation, and optimize its design. 600px =====Pile distances===== In this screen you can adjust the pile distances. You can do this in 2 ways. #by clicking on the dimension line and entering a different distance, or #by dragging the support point graphically with the mouse. After changing this, the bea...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

BACK

Beam grid concrete

With XFEM4U you can easily design a beam grid or a piled concrete foundation, and optimize its design.

Balkenrooster.png

Pile distances

In this screen you can adjust the pile distances. You can do this in 2 ways.


  1. by clicking on the dimension line and entering a different distance, or
  2. by dragging the support point graphically with the mouse.


After changing this, the beam grid is automatically recalculated and so you see the result immediately. immediately.

Longitudal.png


Longitudinal reinforcement

The required additional longitudinal reinforcement is automatically designed. In this tab the reinforcement is shown and you can also adapt all reinforcement. Both the basic reinforcement and the additional reinforcement.

Longitudal.png


Adapt the reinforcement bars

Double click at the reinforcement bar with the left mouse button. A dialog box is opened.

Langswap.png

You can choose between "amount x diameter" , "diameter - ctc distance" of "mm2"


Extend/shorten the reinforcement bars

Go to the end of the bar with your mouse. The cursor changes and you can easily extend / shorten the bar.


Relocate the reinforcement bars

Relocate your mouse to the reinforcement. The cursor changes and you can easily relocate the bar.


Copy reinforcement bar

Relocate your mouse to the reinforcement. With the right mouse button you open a context menu, select copy.


Remove reinforcement bar

Relocate your mouse to the reinforcement. With the right mouse button you open a context menu, select remove.

Menu

Beam group

Here you can select the beam which you want to be displayed. You can also click on the concerning beam in the 3d display. This beam is shown in yellow.


Longitudinal reinforcement/ stirrups

You can choose to display the longitudinal reinforcement or the stirrups.


Detail.png Show a moveable screen with the reinforcement tables

Longitudaltable.png


Calculator.pngDesign

With this function you can re-design the reinforcement of this beam. This may be necessary if, for example, you have adjusted the geometry or load.

Redesign.png


Calculator.png Design of all the beams

With this function you can re-design the reinforcement of all the beams.This may be necessary if, for example, you have adjusted the geometry or load.


Calculator.png Cut

You can cut the reinforcement bars.


Concrete.png Concrete cross section

With this function you can ask for a drawing and detailed calculation of every cross section.

Concretedetail.png

Choose for Preview if you want to obtain a detailed calculation

Stirrups

The stirrups are automatically designed based on a combination of shear force and torsion.

Stirrups.png

The center-to-center stirrup distances and the area over which the stirrups run can be changed graphically by clicking on the appropriate dimension line.


Detail.png The stirrups can be adapted in the table as well.

Stirrupstable.png