XBeam2D XFrame2D Menu

From Struct4u
Revision as of 06:09, 7 September 2022 by Struct4U (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Tab on ribbon Icon Command Description
File Struct4UNew.png New New input
Struct4UOpen.png Open Open an already existing file
Close Close the opened file
Struct4USave.png Save Save the input in a file
Struct4USave.png Save as Save the input in another (copy ) file
Struct4UPreview.png Preview Making a print preview on the screen
Struct4UPrint.png Print Print of the calculation
Struct4URTF.png RTF-output Save the output as an RTF-format (MS-Word)
Struct4UPDF.png PDF-output Save the output as a PDF-format
Exit Close the program
Geometry Struct4UBeam.png Beam Inserting Beams
Struct4UNode.png Node Inserting Nodes
XBeam2DPinned.png Pinned Pinned support. See Supports
XBeam2DRoller.png X-roller Roller support in the x-direction
XBeam2DRoller2.png Z-roller Roller support in the z-direction
XBeam2DFixed.png Fixed Fixed support
XBeam2DSpringZ.png Z-spring Spring support in z-direction. Translation spring in z-direction.
XBeam2DSpringX.png X-spring Spring support in x-direction. Translation spring in x-direction.
XBeam2DSpringY.png R-spring Spring support around y-axis. Rotation spring at y-axis.
Internal hinge Internal hinge in beam. By this you can quickly insert a gerber beam.
Load Load-q.png q-load Evenly distributed beam load or a linear varying beam load ( for example triangle load)

See also Loads

Load-F.png F-load Point load on beam
Load-M.png M-load Moment on beam
Cur nodeload.png Node load Load on node (Fx force in x-direction, Fz force in z-direction and/or My moment around y-axis)
Node displacement Forced node displacement of the node. ( dx displacement in x-direction, dz displacement in z-direction and/or dr rotation around the y-axis).
Edit Struct4UUndo.png Undo Undo an adaptation. Every adaptation is saved intern. With this function you can undo one or multiple adaptations. There is no limit in the amount of steps that you can go back.
Struct4URedo.png Redo Redo an adaptation.
Struct4USelect.png Select Set setting to : Select. In this modus you can select a profile ( make active) in the graphical screen.
View Struct4UZoomWindow.png Zoom window Set setting to : Zoom window. This function is used to zoom into a certain part in the cross section design.

Method: With the left mouse button pushed, you make a rectangular window from the left bottom to the right top. The modus is automatically turned off after the zooming.

Struct4UPan.png Pan By the use of pan you can drag / move a zoomed part of your drawing. Other parts of the construction will be presented.
Struct4UZoomExtents.png Zoom extents Set the setting to Zoom extents. This function is used to show everything in full screen. The modus is automatically turned off after zooming out.
Struct4UPreviousView.png Previous view With zoom view you can eventually zoom into a part of the construction in multiple steps. With the function previous view          you go back 1 step.
Options Struct4UDistance.png Distance Set the setting to: Distance. In this modus distances can be measured. There is automatically snapped to all the occurring contour points, and points in the middle of all the lines. This modus is not turned off.


Method: Select the starting point while using the snap-function. With the left mouse button pushed you go to another known point in the construction. While pushing the left mouse button, a measure line is drawn and a little window is displayed wherein the distances dL, dy and dz in mm are shown.

Settings Adjusting the settings.
Help Struct4UHelp.png Help Open help file.
Information Information with regard to the application and license agreement.