XML Interface: Difference between revisions
No edit summary |
No edit summary |
||
| Line 30: | Line 30: | ||
===Profiles=== | ===Profiles=== | ||
There are 3 types of profiles. | There are 3 types of profiles. | ||
1) Steel/Wood | ====1) Steel/Wood==== | ||
They are noticed as: | |||
<Number>1</Number> | <Number>1</Number> | ||
<Profile_name>HEA100</Profile_name> | <Profile_name>HEA100</Profile_name> | ||
<Material_type>0</Material_type> | <Material_type>0</Material_type> | ||
<Material>S235</Material> | <Material>S235</Material> | ||
<Angle>0</Angle> | <Angle>0</Angle> | ||
2) Concrete | ====2) Concrete==== | ||
There are several parameters h1,b1 etc. They are used for the several shapes within a concrete beam. | There are several parameters h1,b1 etc. They are used for the several shapes within a concrete beam. | ||
<Number>2</Number> | <Number>2</Number> | ||
<Profile_name>Profile 2</Profile_name> | <Profile_name>Profile 2</Profile_name> | ||
<Material_type>1</Material_type> | <Material_type>1</Material_type> | ||
<Material>C20/25</Material> | <Material>C20/25</Material> | ||
<Angle>0</Angle> | <Angle>0</Angle> | ||
<Profile_shape>2</Profile_shape> | <Profile_shape>2</Profile_shape> | ||
<h>400</h> | <h>400</h> | ||
<b>300</b> | <b>300</b> | ||
<h1>50</h1> | <h1>50</h1> | ||
<b1>50</b1> | <b1>50</b1> | ||
<h2>50</h2> | <h2>50</h2> | ||
<b2>50</b2> | <b2>50</b2> | ||
<h3>50</h3> | <h3>50</h3> | ||
<b3>50</b3> | <b3>50</b3> | ||
<h4>50</h4> | <h4>50</h4> | ||
<b4>50</b4> | <b4>50</b4> | ||
3) Built-up section | |||
====3) Built-up section==== | |||
Not supported yet. | Not supported yet. | ||
| Line 70: | Line 93: | ||
<Number>1</Number> | <Number>1</Number> | ||
<Beamgroupnumber>1</Beamgroupnumber> | <Beamgroupnumber>1</Beamgroupnumber> | ||
<From_node_number>1</From_node_number> | <From_node_number>1</From_node_number> | ||
<To_node_number>2</To_node_number> | <To_node_number>2</To_node_number> | ||
<Angle>0</Angle> | <Angle>0</Angle> | ||
<Angle_profile>0</Angle_profile> | <Angle_profile>0</Angle_profile> | ||
<Profile_number>1</Profile_number> | <Profile_number>1</Profile_number> | ||
<Z>0</Z> | <Z>0</Z> | ||
<Top_Center_Bottom>Center</Top_Center_Bottom> | <Top_Center_Bottom>Center</Top_Center_Bottom> | ||
| Line 84: | Line 115: | ||
<Number>1</Number> | <Number>1</Number> | ||
<Node>2</Node> | <Node>2</Node> | ||
<Node>1</Node> | <Node>1</Node> | ||
<Node>4</Node> | <Node>4</Node> | ||
<Node>3</Node> | <Node>3</Node> | ||
<h>200</h> | <h>200</h> | ||
<Material_type>c9a5876f475cefab7cc11281b017914a1</Material_type> | <Material_type>c9a5876f475cefab7cc11281b017914a1</Material_type> | ||
<Material>C20/25</Material> | <Material>C20/25</Material> | ||
<Z>0</Z> | <Z>0</Z> | ||
<Top_Center_Bottom>Center</Top_Center_Bottom> | <Top_Center_Bottom>Center</Top_Center_Bottom> | ||
===RebarLongitudinal=== | ===RebarLongitudinal=== | ||
Rebar in Longitudinal direction within concrete beamgroups. | Rebar in Longitudinal direction within concrete beamgroups. | ||
<Number>1</Number> | <Number>1</Number> | ||
<Beamgroupnumber>2</Beamgroupnumber> | <Beamgroupnumber>2</Beamgroupnumber> | ||
<FromX>-515</FromX> | <FromX>-515</FromX> | ||
<ToX>3515</ToX> | <ToX>3515</ToX> | ||
<Reinforcement>2x16</Reinforcement> | <Reinforcement>2x16</Reinforcement> | ||
<Z>-369</Z> | <Z>-369</Z> | ||
<Ldstart>160</Ldstart> | <Ldstart>160</Ldstart> | ||
<Ldend>160</Ldend> | <Ldend>160</Ldend> | ||
<SteelGrade>B500B</SteelGrade> | <SteelGrade>B500B</SteelGrade> | ||
===RebarStirrup=== | ===RebarStirrup=== | ||
Stirrup reinforcement within a concrete beamgroup. | Stirrup reinforcement within a concrete beamgroup. | ||
===Layers=== | ===Layers=== | ||
Layers within the model. | Layers within the model. | ||
<Layer_number>1</Layer_number> | <Layer_number>1</Layer_number> | ||
<Layer_description>Layer 1</Layer_description> | <Layer_description>Layer 1</Layer_description> | ||
Revision as of 13:57, 13 August 2022
Within XFEM4U there is an import/export option in XML. With this XML-interface there are many chances for automation of your structural engineeringtasks as well as interact with other drawing/3D modelling tools.
The used example XML-file can be found http://68.183.11.126/XMLExample.xml
ProjectName
Contains the projectname.
ProjectNumber
Contains the projectnumber.
ExportDateTime
Timestamp.
XMLExportVersion
Version of the xml-exporter.
Nodes
Nodes contains a list with all the nodes used by beams and plates. They have a number, X,Y and Z-axe value in mm.
Supports
Contains the list of supports. They have a number, nodenumber and all the otheroptions belonging to the support in XFEM4U.
Grids
Grids contains the lists of grids. The syntax is identical with XFEM4U. So 0 1000 3x4000 means 5 grids with a spacing of 1000,4000,4000,4000.
Profiles
There are 3 types of profiles.
1) Steel/Wood
They are noticed as:
<Number>1</Number>
<Profile_name>HEA100</Profile_name>
<Material_type>0</Material_type>
<Material>S235</Material>
<Angle>0</Angle>
2) Concrete
There are several parameters h1,b1 etc. They are used for the several shapes within a concrete beam.
<Number>2</Number>
<Profile_name>Profile 2</Profile_name>
<Material_type>1</Material_type>
<Material>C20/25</Material>
<Angle>0</Angle>
<Profile_shape>2</Profile_shape>
<h>400</h>
300
50
<b1>50</b1>
50
<b2>50</b2>
50
<b3>50</b3>
50
<b4>50</b4>
3) Built-up section
Not supported yet.
Beamgroup
A beamgroup is an object which is used for combining beams to one group for codechecking in steel, wood and concrete.
Beams
Beams are noticed as follows:
<Number>1</Number>
<Beamgroupnumber>1</Beamgroupnumber>
<From_node_number>1</From_node_number>
<To_node_number>2</To_node_number>
<Angle>0</Angle>
<Angle_profile>0</Angle_profile>
<Profile_number>1</Profile_number>
<Z>0</Z>
<Top_Center_Bottom>Center</Top_Center_Bottom>
Plates
Plates are descriped as a list of nodes, thickness and material.
<Number>1</Number>
<Node>2</Node>
<Node>1</Node>
<Node>4</Node>
<Node>3</Node>
<h>200</h>
<Material_type>c9a5876f475cefab7cc11281b017914a1</Material_type>
<Material>C20/25</Material>
<Z>0</Z>
<Top_Center_Bottom>Center</Top_Center_Bottom>
RebarLongitudinal
Rebar in Longitudinal direction within concrete beamgroups.
<Number>1</Number>
<Beamgroupnumber>2</Beamgroupnumber>
<FromX>-515</FromX>
<ToX>3515</ToX>
<Reinforcement>2x16</Reinforcement>
<Z>-369</Z>
<Ldstart>160</Ldstart>
<Ldend>160</Ldend>
<SteelGrade>B500B</SteelGrade>
RebarStirrup
Stirrup reinforcement within a concrete beamgroup.
Layers
Layers within the model.
<Layer_number>1</Layer_number>
<Layer_description>Layer 1</Layer_description>