|
|
| (6 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| === Loads ===
| | [[Documentation XBeam2D|BACK]] |
| | |
| | |
| [[File:XBeam2DRibbonLoads.png|frameless|969x969px]] | |
| | |
| Every load (node load, beam load or node displacements) are inserted per load case.
| |
| | |
| Load cases
| |
| | |
| Beam load
| |
| | |
| Node load
| |
| | |
| Node displacement
| |
| | |
| === Input of the load cases ===
| |
| [[File:XBeam2DLoadCases.png|frameless|588x588px]]
| |
| | |
| '''No.'''
| |
| | |
| This number is generated automatically. You can not change this number
| |
| | |
| | |
| '''Description'''
| |
| | |
| Free text to describe the load case
| |
| | |
| | |
| '''Type'''
| |
| | |
| The type of load. Dependent on the type of load, standard combination factors psi0, psi1, and psi2 are determined according to the Eurocode.
| |
| | |
| These combination factors are offered as a standard by entering the load combinations. However, these values can be adapted.
| |
| | |
| Automatically two load combinations are generated. Permanent and variable loads.
| |
| | |
| '''Automatically generate combinations'''
| |
| | |
| When you enter/change load combinations, the load combinations are automatically generated. You can also change these combinations and expand them.
| |
| | |
| === Sequence load cases ===
| |
| With a click on the right mouse button, the context menu shown below is opened. With these functions you can easily adapt the sequence of the load cases and/or insert load cases.
| |
| | |
| [[File:XBeam2DLoadCasesSequence.png|frameless]]
| |
| | |
| '''Insert'''
| |
| | |
| A new load case is created, and inserted above the current load case.
| |
| | |
| | |
| '''Delete'''
| |
| | |
| The load case is deleted, including all the loads
| |
| | |
| | |
| '''Copy'''
| |
| | |
| The load case is copied, including all the loads
| |
| | |
| | |
| '''Move up/ move down'''
| |
| | |
| A load can be moved up and down a line.
| |
| | |
| | |
| '''Copy loads from..'''
| |
| | |
| Every load from an already existing load case can be copied. The dialog box shown below is opened. Herein you choose the load case from which you want to copy the loads.
| |
| | |
| === Load combinations ===
| |
| [[File:XBeam2DLoadCombinations.png|frameless|830x830px]]
| |
| | |
| '''No.'''
| |
| | |
| This number is automatically generated. You can not change this number.
| |
| | |
| | |
| '''Description'''
| |
| | |
| Free text space to describe the load combination
| |
| | |
| | |
| '''Type'''
| |
| | |
| The type of load (ULS - ultimate limit state, ULS- fire, SLS-serviceability limit state, quasi permanent). Dependent on the type of combination, standard values for the combination factors (psi) and the load factor (gamma) are offered according to the Eurocode. But these values can be adapted.
| |
| | |
| | |
| '''Columns with load cases'''
| |
| | |
| For all the load cases, columns are created. In that way, a table appears in which all the combinations are shown. Every cell contains 2 values in the syntax : combination factor x load factor.
| |
| | |
| | |
| When you click on the cell the following dialog box appears. Here you can adapt both values.
| |
| | |
| [[File:XBeam2DLoadCombinations2.png|frameless]]
| |
| | |
| | |
| For the combination factor and the load factor combo-boxes are offered including the standard values from which you can choose. You can also insert an own value. This gives a lot of freedom. If you for instance take one of the values as zero, the product of the two values obviously is zero as well. In that case the cell is showed 'empty'. This is only to make things clear.
| |
| | |
| | |
| Standard there are three load combinations generated. (ULS (6.10a), ULS (6.10b) and SLS)
| |
| | |
| === Sequence load combinations ===
| |
| With a click on the right mouse button, the context menu shown below is opened. With these functions you can easily adapt the sequence of the load cases and/or insert load cases.
| |
| | |
| [[File:XBeam2DLoadCasesSequence.png|frameless]]
| |
| | |
| '''Insert'''
| |
| | |
| A new load combination is created and inserted above the current load case.
| |
| | |
| | |
| '''Delete'''
| |
| | |
| The load combination is deleted.
| |
| | |
| | |
| '''Copy'''
| |
| | |
| The load combination is copied.
| |
| | |
| | |
| '''Move up/ move down'''
| |
| | |
| A load combination can be moved up and down a line.
| |
| | |
| | |
| '''Copy ULS combination to SLS'''
| |
| | |
| Every load combination of the type ULS will be copied as type SLS. The load factors are set to 1.
| |
|
| |
|
| ===Beam Loads=== | | ===Beam Loads=== |
|
| |
|
| Beam loads are inserted in a local beam coordinate system. See [[Design arrangement. | http://68.183.11.126/index.php/Struct4U_Design_Arrangements]] | | Beam loads are inserted in a local beam coordinate system. See [[Struct4U Design Arrangements | Design arrangement.]] |
|
| |
|
| [[File:XBeam2DBeamLoads1.png|frameless]] | | [[File:XBeam2DBeamLoads1.png|frameless]] |
| Line 143: |
Line 14: |
|
| |
|
| Choice for the load case. Here you can directly insert a new load case. | | Choice for the load case. Here you can directly insert a new load case. |
| | |
|
| |
|
| '''Type of load''' | | '''Type of load''' |
| Line 180: |
Line 52: |
|
| |
|
| Only for the q- and F-load. The angle in degrees to the perpendicular. The direction opposite to the clockwise direction is positive. | | Only for the q- and F-load. The angle in degrees to the perpendicular. The direction opposite to the clockwise direction is positive. |
| | |
|
| |
|
| '''Beam angle''' | | '''Beam angle''' |
| Line 199: |
Line 72: |
| Beam loads can also be added/changed in the table. It does not matter. It is also possible to change in between graphical input and numerical input via tables. | | Beam loads can also be added/changed in the table. It does not matter. It is also possible to change in between graphical input and numerical input via tables. |
| [[File:XBeam2DBeamLoads5.png|none|frame]] | | [[File:XBeam2DBeamLoads5.png|none|frame]] |
|
| |
| ===Node ===
| |
BACK
Beam Loads
Beam loads are inserted in a local beam coordinate system. See Design arrangement.
The dialog box shown below is opened.
Load case
Choice for the load case. Here you can directly insert a new load case.
Type of load
Choose the type of load you want to add.
| Type |
Description
|
 |
Even distributed load, or varying load
|
 |
Point force - F-load
|
 |
Moment - M-load
|
q1
The magnitude of the load. For the q-load the magnitude of the load at the beginning in kN/m. For a point load the amplitude of the load in kN. For a moment the magnitude of the load in kNm.
With plus min you can change the sign of the loads very easy. Standard the sign is at min because this is most common.
q2
Only for the q-load the magnitude of the load at the end in kN/m.
a
The distance in mm where the load starts, counted from the begin node of the beam.
L
Only for the q-load the length of the load should be inserted. Standard the load is going up to the end of the beam.
Angle
Only for the q- and F-load. The angle in degrees to the perpendicular. The direction opposite to the clockwise direction is positive.
Beam angle
The angle in degrees with the global x-axis. The direction opposite to the clockwise direction is positive. With
You can take over the angle from the previous section.
z
The distance in the z-direction in mm relative to the reference line. The reference line is adjustable. 'z relative to top', 'z relative to centerline', 'z relative to bottom'.
This distance is only relevant for lateral-torsional buckling resistance check .
Table
Beam loads can also be added/changed in the table. It does not matter. It is also possible to change in between graphical input and numerical input via tables.
You can take over the angle from the previous section.
