XFrame2D Loads: Difference between revisions

From Struct4u
Jump to navigation Jump to search
(Created page with "BACK === Type of loads === Choose the type of load you want to add. {| class="wikitable" |- !Type!!Title |- |20 px|Wikipedia encyclopedia|link=http://68.183.11.126/index.php/File:Load-q.png||Beam load |- | ||Beam load QYload. |- |20 px|Wikipedia encyclopedia|link=http://68.183.11.126/index.php/File:Load-F.png||F-load |- |File:Load-M.png|20 px|Wikipedia encyclopedia|link=http://68.183.11.126/index.php/...")
 
No edit summary
 
Line 58: Line 58:
|}
|}


=== '''Load Table''' ===
=== Load Table ===
Beam loads can also be added/changed in the table. It does not matter. It is also possible to change in between graphical input and numerical input via tables.[[File:XBeam2DBeamLoads5.png|none|frame]]
Beam loads can also be added/changed in the table. It does not matter. It is also possible to change in between graphical input and numerical input via tables.[[File:XBeam2DBeamLoads5.png|none|frame]]

Latest revision as of 08:19, 12 November 2022

BACK

Type of loads

Choose the type of load you want to add.

Type Title
Wikipedia encyclopedia Beam load
Beam load QYload.
Wikipedia encyclopedia F-load
Wikipedia encyclopedia M-load
XFrame2DNodeload.png Node load
XFrame2DForcedNodeDisplacements.png Forced node displacement

Beam Loads

Beam loads are inserted in a local beam coordinate system. See Design arrangement.

XFrame2DLoads.png


The dialog box shown below is opened.

XBeam2DBeamLoads2.png

Load Dialog

Type Title
Load case Choice for the load case. Here you can directly insert a new load case.
q1 The magnitude of the load. For the q-load the magnitude of the load at the beginning in kN/m. For a point load the amplitude of the load in kN. For a moment the magnitude of the load in kNm.

With plus min you can change the sign of the loads very easy. Standard the sign is at min because this is most common.

q2 Only for the q-load the magnitude of the load at the end in kN/m.
a The distance in mm where the load starts, counted from the begin node of the beam.
L Only for the q-load the length of the load should be inserted. Standard the load is going up to the end of the beam.
Angle Only for the q- and F-load. The angle in degrees to the perpendicular. The direction opposite to the clockwise direction is positive.
Beam angle The angle in degrees with the global x-axis. The direction opposite to the clockwise direction is positive. With XBeam2DBeamLoads4.png You can take over the angle from the previous section.
z The distance in the z-direction in mm relative to the reference line. The reference line is adjustable. 'z relative to top', 'z relative to centerline', 'z relative to bottom'.

This distance is only relevant for lateral-torsional buckling resistance check.

Load Table

Beam loads can also be added/changed in the table. It does not matter. It is also possible to change in between graphical input and numerical input via tables.

XBeam2DBeamLoads5.png