XFEM4U UI and settings: Difference between revisions

From Struct4u
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 19: Line 19:
Optimize steel profiles.
Optimize steel profiles.


====Menu====
[[File:Menu 2.png | 1200px]]
[[File:Menu3.png | 1200px]]
[[File:Menu4.png | 350px]]
=====Project data=====
[[File:Projectdata.png | 400px]]
=====Preview=====
Menu: '''File > Preview'''
Toolbar: [[File:Preview v2.png | 30px]]
The dialog box of the print preview offers, next to the standard functionality, many extra's including directly creating an e-mail with the calculation in PDF-format attached. From this functionality you can also generate a PDF-file or add a watermark in the output file.
[[File:Preview v2.png | 30px]]
======Output selection======
[[File:outputselection.png | 500px]]
'''Page header'''
Setting whether the header should be printed
'''Page footer'''
Setting whether the footer should be printed
'''Table of content'''
Setting whether the table of content should be printed
'''Drawing'''
Setting whether a drawing should be displayed at the front page. By standard this is turned off. The drawing resembles the display at the screen.
'''Layers'''
You can show certain layers separately in the output





Latest revision as of 12:20, 7 September 2022

BACK


Notifications.png Notifications

When the force distribution can not be calculated, for instance when the structure is instable, a dialog box is opened. This dialog can be reopened with the button shown above. In this dialog box the notifications of the calculation module are shown.

Notifications2.png


Detail.png Settings

Calculation settings. See Calculation settings.


Steel.png Optimize

Optimize steel profiles.


Views

You can select the 3d view images to be added into your output report.

Settings

Tab Settings & Help > Settings

The dialog box settings consists of 5 tabs:

Settings.png

All the inserted values will be saved. When the program is restarted, all the previous entered values will be read and activated.


Apply

Without leaving the dialog box you can see which effect the setting will have on your construction.

Watch out! When you want to apply and save the inserted values definitely, you have to use the button Ok.


Default values

All the values will be reassigned to the default values.


OK

The dialog box is closed and all the inserted values will be implemented and saved.


Cancel

The dialog box is closed and the previous settings will be used.

Snap options

Tab Settings & Help > Settings > tab Snap options

Settings.png

Snap.png

When, in the graphical screen, the cursor comes near a known point and/or an edge, the cursor is automatically placed to this point. There is been snapped to this point.

In much known design programs this functionality is used. It lets you select an exact point.


A very convenient functionality by drawing or displacing a node and/or a beam.


Snap size

The amplitude in mm in which is searched to a known point (node/middle of a beam/ grid line). The default value is set to 150 mm. Generally this value suffices.


Snap to node

Setting whether there needs to be snapped to the nearest node.


Snap to midpoint

Setting whether there needs to be snapped to the midpoint of a beam. A red rectangle is displayed when this point is found.


Snap to grid lines/levels

Grid lines and levels can be used. Here you get to choose whether there needs to be snapped to the intersections. Nodes follow the grid lines and levels. The node will be drawn light grey and follows these lines. At the right bottom of the screen you can see the node coordinates. You can place a node graphically. Obviously you can also numerical change the exact node values afterwards. When you double click on the node, a dialog box is opened. You can also change the node coordinates in this table. When you click on the node, the focus directly lies on the concerning line in the node table.


Snap to existing coordinate lines

All the nodes that are inserted are not directly visualized in the grid lines and levels. This makes snapping possible. This is a very useful functionality. Often the geometry of a construction is regular. Multiple nodes often lie on the same x- or z- coordinate. A construction can be inserted very easy and quick.