XFEM4U Design Arrangements

From Struct4u
Revision as of 20:36, 15 August 2022 by Struct4U (talk | contribs) (Created page with " BACK The program knows four '''clockwise''' coordinate systems. ====Main coordinate system==== The location of this global coordinate system is arbitrary. The XY-plane coincides with the plane of the framework. This coordinate system is used for setting the node coordinates, node limitations and node loads. Calculated node deformations and support reactions will be displayed relative to this coordinate system. File:MainCoordinates.png|20...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

BACK

The program knows four clockwise coordinate systems.

Main coordinate system

The location of this global coordinate system is arbitrary. The XY-plane coincides with the plane of the framework. This coordinate system is used for setting the node coordinates, node limitations and node loads. Calculated node deformations and support reactions will be displayed relative to this coordinate system.

MainCoordinates.png

Beam coordinate system

The origin of this coordinate system is always in the beginning of the relevant beam. The XZ-plane coincides with the plane of the framework. The x-axis coincides with the beam-axis.

BeamCoordinates.png

Node coordinate system

NodeCoordinate.png

It is possible to use a local (node-) coordinate system. The origin lies in the relevant node. The direction of the x-axis is determined by assigning a relative dx and dz coming from the relevant node ( see the figure above). Local coordinate systems can be used to calculate node limitations ( support reactions and restrains ), node loads and/or node deformations in an arbitrary direction.

Plate coordinate system

The planar plane of the plate is the local XY-plane. If the plate is drawn clockwise then the Z-axe is positive.

PlateCoordinateSystem.png

The in- and output data will be displayed with regard to the above explained coordinate system.

  • A force in the direction of the positive x- or z- axis is considered positive.
  • A moment rotating from the positive x-axis to the positive z-axis (according to the cork-screw rule) is positive.
  • A moment opposite to the 'clockwise' rotation is positive.