XBeam2D XFrame2D Load Cases

From Struct4u
Revision as of 14:07, 26 October 2022 by Rob-Struct4u (talk | contribs) ()
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Load Cases

XBeam2DRibbonLoads.png

Every load (node load, beam load or node displacements) is inserted per load case.

Input of the load cases

XBeam2DLoadCases.png

No.

This number is generated automatically. You cannot change this number


Description

Free text to describe the load case


Type

The type of load. Dependent on the type of load, standard combination factors psi0, psi1, and psi2 are determined according to the Eurocode.

These combination factors are offered as a standard by entering the load combinations. However, these values can be adapted.

Automatically two load combinations are generated. Permanent and variable loads.


Automatically generate combinations

When you enter / change load combinations, the load combinations are automatically generated. You can also change these combinations and expand them.

Sequence load cases

With a click on the right mouse button, the context menu shown below is opened. With these functions you can easily adapt the sequence of the load cases and/or insert load cases.

XBeam2DLoadCasesSequence.png

Insert

A new load case is created, and inserted above the current load case.


Delete

The load case is deleted, including all the loads


Copy

The load case is copied, including all the loads


Move up/ move down

A load can be moved up and down a line.


Copy loads from..

Every load from an already existing load case can be copied. The dialog box shown below is opened. Herein you choose the load case from which you want to copy the loads.