XBeam2D Selection

From Struct4u
Revision as of 05:46, 6 September 2022 by Struct4U (talk | contribs) (Created page with "For selecting a (big) amount of nodes or beams in one time you can use the ''''Select window'''<nowiki/>' or '''<nowiki/>'Select crossing'''<nowiki/>'. This works exactly the same way as you might know from a.o. AutoCAD. You draw a '<nowiki/>'''window'''<nowiki/>' from left to right. You draw a ''''crossing'''<nowiki/>' from right to left. '''<nowiki/>'Select window'( from left bottom to the right top)''' 1) Determine, by the use of your mouse, the starting point of...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

For selecting a (big) amount of nodes or beams in one time you can use the 'Select window' or 'Select crossing'.

This works exactly the same way as you might know from a.o. AutoCAD.

You draw a 'window' from left to right. You draw a 'crossing' from right to left.


'Select window'( from left bottom to the right top)

1) Determine, by the use of your mouse, the starting point of the window you want to draw. This is the left corner of the window you want to draw.

2) Push the left mouse button

3) While you push the left mouse button you move the mouse to the right. A window is drawn in (partly transparent) blue.

4) When you release the left mouse button, all the nodes and beams that are completely in this window will be selected.


'Select crossing' ( from the right top to the left bottom)

1) Determine, by the use of your mouse, the starting point of the window you want to draw. This is the right corner of the window you want to draw.

2) Push the left mouse button.

3) While you push the left mouse button you move the mouse to the left. A window is drawn in (partly transparent) green.

4) When you release the left mouse button, all the nodes and beams that are partially in this window will be selected.


Multi select

To select multiple nodes or beams you can use the CRTL-button or the SHIFT-button.

By pushing the CRTL-button or the SHIFT button continuously, you 'draw' the selection window as is described above.