XBeam2D Calculation settings

From Struct4u
Revision as of 07:55, 6 September 2022 by Struct4U (talk | contribs) (Created page with "File:XBeam2DCalculationSettings.png '''Analysis''' Within XBeam2D the analysis is Geometric linear (GL) ). '''Self-weight''' You can choose if you want the dead weight to be automatically generated or not. '''Gravity acceleration g''' Gravity acceleration in m/s2. === '''Code check''' === '''Design working life''' The design working life of the building in years. '''National Annex''' The national annex can be chosen by country. Currently the nationa...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

XBeam2DCalculationSettings.png


Analysis

Within XBeam2D the analysis is Geometric linear (GL) ).


Self-weight

You can choose if you want the dead weight to be automatically generated or not.


Gravity acceleration g

Gravity acceleration in m/s2.

Code check

Design working life

The design working life of the building in years.


National Annex

The national annex can be chosen by country. Currently the national annexes of The Netherlands, Germany, United Kingdom, Belgium, Italy

Consequence class

The consequence class of the construction. This determines among other things, the load factors that need to be used.



Steel code

The steel code you want to use


Imperfections

It can be set whether you want to take imperfections into account or not. For the time being, in Xframe2d global tilt is only possible in two directions. The beam imperfections (beam deformations) are not taken into account. However, the check according to Eurocode does take this into account, by assuming the buckling length equal to the beam length.

Retrieved from "https://wiki.struct4u.com/w/index.php?title=XBeam2D_Calculation_settings&oldid=1038"