Struct4U Longitudinal reinforcement

From Struct4u
Revision as of 05:05, 7 September 2022 by Struct4U (talk | contribs) (Created page with "The required longitudinal reinforcement is automatically designed. In this tab the reinforcement is shown and you can also adapt all reinforcement. Both the basic reinforcement and the additional reinforcement. File:XBeam2DRC1.png '''Adapt the reinforcement bars''' Double click at the reinforcement bar with the left mouse button. A dialog box is opened. File:XBeam2DRC3.png You can choose between "amount x diameter" , "diameter - ctc distance" of "mm2" '...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The required longitudinal reinforcement is automatically designed. In this tab the reinforcement is shown and you can also adapt all reinforcement. Both the basic reinforcement and the additional reinforcement.


XBeam2DRC1.png

Adapt the reinforcement bars

Double click at the reinforcement bar with the left mouse button. A dialog box is opened.

XBeam2DRC3.png

You can choose between "amount x diameter" , "diameter - ctc distance" of "mm2"

Extend/shorten the reinforcement bars

Go to the end of the bar with your mouse. The cursor changes and you can easily extend / shorten the bar.

Move the reinforcement bars

Move your mouse to the reinforcement. The cursor changes and you can easily move the bar.

Copy reinforcement bar

Move your mouse to the reinforcement. With the right mouse button you open a context menu, select copy.

Delete reinforcement bar

Move your mouse to the reinforcement. With the right mouse button you open a context menu, select delete.

Longitudinal reinforcement/ stirrups

You can choose to display the longitudinal reinforcement or the stirrups.

Struct4USpy.png

Show a moveable screen with the reinforcement tables

XBeam2DRC4.png


Struct4UCalculate.png

Design

With this function you can re-design the reinforcement of this beam. This may be necessary if, for example, you have adjusted the geometry or load.

XBeam2DRC5.png

Struct4UCut.png

Cut

You can cut the reinforcement bars.

Struct4UConcreteSection.png

Concrete cross section

With this function you can ask for a drawing and detailed calculation of every cross section.

Struct4UConcreteCrossSection.png

Choose for Preview if you want to obtain a detailed calculation