Profile: Difference between revisions

From Struct4u
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The first time you draw a beam, a profile needs to be chosen / inserted. There is asked what kind of profile you want to add. Also if you want to enter a new profile, there is asked what kind of profile you want to insert.
The first time you draw a beam, a profile needs to be chosen / inserted. There is asked what kind of profile you want to add. Also if you want to enter a new profile, there is asked what kind of profile you want to insert.


Line 332: Line 334:




Menu
 
'''Menu'''


[[File:menu.png|500 px|Wikipedia encyclopedia]]
[[File:menu.png|500 px|Wikipedia encyclopedia]]
'''Select'''
you can change the focused profile by left click mouse button within the profile bounds.
'''Move'''
Profiles can be moved. There is an automatic snap to known points, which will make moving profile quite easy. You can change the coordinates as well.
'''Zoom window'''
With this function you can zoom in on a part of your construction. You can use this by making the graphical input easier.
'''Zoom extents'''
With zoom extents the total built up section is shown in full screen.
'''Pan'''
By the use of pan you can drag / move a zoomed part of your drawing.
'''Distance'''
In this modus distances can be measured.

Revision as of 12:34, 5 September 2022


The first time you draw a beam, a profile needs to be chosen / inserted. There is asked what kind of profile you want to add. Also if you want to enter a new profile, there is asked what kind of profile you want to insert.

Wikipedia encyclopedia

Steel

Wikipedia encyclopedia

Remark

You can adapt all profile dimensions by clicking on the concerning values in the dimension lines.


Profile name

You can enter the profile name here, or select a profile from the database. You can also directly type IPE160, HEA200 or HE200A here.

Do you want to enter a common steel profile from the database, click on the 3 dots... at the right side of the input field.

Wikipedia encyclopedia

After you selected a basic shape, you can subsequently adapt all the profile dimensions by clicking on the concerning numbers in the dimension line. You can also adapt the profile dimensions of the standard profiles by the use of this method.


E

The elasticity modulus, which is adaptable.


Angle

You can rotate the profile among an angle

Concrete

Wikipedia encyclopedia

Cross sectional shape

You can choose from a big amount of cross sectional shapes. When you chose a shape, you can subsequently adapt the profile dimensions by clicking on the concerning values in the dimension lines.


Concrete top layer

Setting whether you want to insert a in-situ concrete top layer with a different concrete grade


Prefab

Setting whether you want to use prefab concrete


Concrete grade

The concrete grade


Steel grade

The steel grade of the basic and additional reinforcement.


Creep coefficient

The creep coefficient of concrete. By this coefficient the effective creep coefficient is calculated according to EN 1992-1-1 art. 5.8.4.

You can insert the creep coefficient yourself or you can have it calculated. See Creep. When the creep coefficient is calculated, a detailed calculation according to EN 1992-1-1 B.1 is displayed in the output as well.


Granule diameter

The nominal granule diameter of concrete


Granule diameter

The nominal granule diameter of concrete


h

The height of the concrete cross section in mm


b

The width of the concrete cross section in mm


h concrete layer

The height of the in-situ concrete top layer in mm

Wikipedia encyclopedia

Environmental class

The environmental or exposure class is used for the determination of the required cover. See Exposure classes


Concrete surface

Can be checked, can not be checked or finished


Delta_Cdev

Execution tolerance of the concrete cover in mm


Cover

Concrete cover top / bottom in mm


Side cover

Side cover left / right in mm


Wikipedia encyclopedia

Basic reinforcement

Basic reinforcement top/bottom

Syntax 1: <amount>x<diameter> [+<amount>x<diameter>...]

Syntax 2: <diameter>-<ctc distance> [+<diameter>-<ctc distance>...]

Syntax 3: <mm2> [ / <diameter>]


2nd layer

Basic reinforcement top / bottom in the second layer


Additional reinforcement diameters

The diameters by which the additional reinforcement is designed


Layers

When designing a floor, the option if the basis reinforcement is in the first or in the second layer


Transverse reinforcement

When designing a floor, the diameter of the transverse reinforcement


Concrete trench

Concrete trench in mm

Wikipedia encyclopedia

Diameters

Stirrup diameters


Distances

Stirrup distances


Number of stirrup sections

The number of stirrup sections. For shear force this is normally 2.


Angle compression strut

Angle compression strut in degrees


Minimum shear reinforcement

Setting whether the minimum shear reinforcement should be taken in to account.


Concrete interface

In the case of a in-situ concrete top layer, the pouring surface can be entered here.

Wikipedia encyclopedia


h

Height of the concrete cross section for the shear force calculation in mm.


b

Width of the concrete cross section for the shear force calculation in mm.


Concrete grade

In case of a in-situ concrete top layer: Concrete grade that needs to be used for the shear force calculation.

Timber

Wikipedia encyclopedia

Remark:

You can change the profile sizes by clicking on the concerning values in the dimension line.


Profile name

Enter the profile name or select a profile from the existing database. You can also directly type 75 x 200 of 75 x 225

When you want to enter a known timber profile from the database, click on the 3 dots... on the right side of the input field.

Wikipedia encyclopedia

Material

Timber


Type of timber

Wikipedia encyclopedia


Timber class

Wikipedia encyclopedia


Climate class

Wikipedia encyclopedia


Basic shape

You can choose from an amount of basic shapes. In this way you can make the profile yourself.

Wikipedia encyclopedia

After you selected a basic shape, you can subsequently adapt all the profile sizes by clicking on the concerning values in the dimension line. You can also can adapt the profile sizes of the standard profiles in this way.


E

The elasticity modulus which is adaptable


Angle

You can rotate the profile among an angle

Build-up selection

Wikipedia encyclopedia

With this module you can built up any section.


Input

Wikipedia encyclopedia


You can Add, Copy and Delete any profiles here. Using Properties you can change your profile or alter the profile dimensions.


Wikipedia encyclopedia


Profile name

Enter the profile name or select from our profile database.


Special input:

  1. Half H syntax: "1/2 profile name [ - min dimension ]" Example: 1/2IPE300 or 1/2HE650B-5
  2. Rectangular: syntax: "S width x height" of "F width x height" Example: S200x12
  3. Hole: syntax: "G width x height" of "H width x height" Example: H50x2
  4. Round: syntax: "R diameter Example: R50
  5. Tube(segment): syntax: "R diameter x thickness [ / hoek1 / hoek2 ] " Example: R500x12 or R500x12/0/180
  6. Trangle: syntax: "D width x height" of "T width x height" Example: T50x60

U

Coordinate u in mm


V

Coordinate v in mm


Angle

Angle in degrees


Graphical input

Graphical view of the built up section, with:

  • cross section of all profiles use. The focused section is displayed with another color.
  • coordinate system
  • centroid
  • principal axis
  • distances from centroid to all largest dimension
  • display of radius of gyration
  • display of plastic neutral axis


Mouse right click context menu

Wikipedia encyclopedia


Menu

Wikipedia encyclopedia


Select

you can change the focused profile by left click mouse button within the profile bounds.


Move

Profiles can be moved. There is an automatic snap to known points, which will make moving profile quite easy. You can change the coordinates as well.


Zoom window

With this function you can zoom in on a part of your construction. You can use this by making the graphical input easier.


Zoom extents

With zoom extents the total built up section is shown in full screen.


Pan

By the use of pan you can drag / move a zoomed part of your drawing.


Distance

In this modus distances can be measured.