Reinforcement calculation plate Eurocode

From Struct4u
Revision as of 10:05, 5 September 2022 by Struct4U (talk | contribs) (Created page with "The reinforcement calculation method of plates within XFEM4U is based on the 3-layer model. The plate is divided into 3 layers based on nxx,nyy,nxy,mxx,myy,mxy,vx and vy. The top and bottom layers are used for the bending moment and the middle layer for normal forces. 800px 800px")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The reinforcement calculation method of plates within XFEM4U is based on the 3-layer model.

The plate is divided into 3 layers based on nxx,nyy,nxy,mxx,myy,mxy,vx and vy. The top and bottom layers are used for the bending moment and the middle layer for normal forces.

Retrieved from "https://wiki.struct4u.com/w/index.php?title=Reinforcement_calculation_plate_Eurocode&oldid=927"