Struct4U Longitudinal reinforcement

The required longitudinal reinforcement is automatically designed. In this tab the reinforcement is shown and you can also adapt all reinforcement. Both the basic reinforcement and the additional reinforcement.

Adapt the reinforcement bars

Double click at the reinforcement bar with the left mouse button. A dialog box is opened.

You can choose between "amount x diameter" , "diameter - ctc distance" of "mm2"

Extend/shorten the reinforcement bars

Go to the end of the bar with your mouse. The cursor changes and you can easily extend / shorten the bar.

Move the reinforcement bars

Move your mouse to the reinforcement. The cursor changes and you can easily move the bar.

Copy reinforcement bar

Move your mouse to the reinforcement. With the right mouse button you open a context menu, select copy.

Delete reinforcement bar

Move your mouse to the reinforcement. With the right mouse button you open a context menu, select delete.

Longitudinal reinforcement/ stirrups

You can choose to display the longitudinal reinforcement or the stirrups.

Show a moveable screen with the reinforcement tables

Design

With this function you can re-design the reinforcement of this beam. This may be necessary if, for example, you have adjusted the geometry or load.

Cut

You can cut the reinforcement bars.

Concrete cross section

With this function you can ask for a drawing and detailed calculation of every cross section.

Choose for Preview if you want to obtain a detailed calculation