XBeam2D XFrame2D Output: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Tab Settings & Help > Preferences> tab Output File:Struct4UPreferencesOutput.png '''Drawing''' Setting whether the drawing of the construction should be in the output. '''Drawing size''' The height and the width on paper in mm. The height is limited to a maximum of 190 mm. The width is limited to a maximum of 150 mm.") |
(No difference)
|
Latest revision as of 06:24, 7 September 2022
Tab Settings & Help > Preferences> tab Output
Drawing
Setting whether the drawing of the construction should be in the output.
Drawing size
The height and the width on paper in mm.
The height is limited to a maximum of 190 mm. The width is limited to a maximum of 150 mm.