Reinforcement calculation plate Eurocode

From Struct4u
Revision as of 10:07, 5 September 2022 by Struct4U (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The reinforcement calculation method of plates within XFEM4U is based on the 3-layer model.

The plate is divided into 3 layers based on nxx,nyy,nxy,mxx,myy,mxy,vx and vy. The top and bottom layer are used for the bending moment forces and the middle layer for normal forces.

See the output example below for all the details of the calculation.

XFEM4UPlateReinforcement1.png

XFEM4UPlateReinforcement2.png