XBeam2D XFrame2D Output

From Struct4u
Revision as of 06:24, 7 September 2022 by Struct4U (talk | contribs) (Created page with "Tab Settings & Help > Preferences> tab Output File:Struct4UPreferencesOutput.png '''Drawing''' Setting whether the drawing of the construction should be in the output. '''Drawing size''' The height and the width on paper in mm. The height is limited to a maximum of 190 mm. The width is limited to a maximum of 150 mm.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Tab Settings & Help > Preferences> tab Output

Struct4UPreferencesOutput.png

Drawing

Setting whether the drawing of the construction should be in the output.

Drawing size

The height and the width on paper in mm.

The height is limited to a maximum of 190 mm. The width is limited to a maximum of 150 mm.